9″ Big Lift Can-Am Defender XMR (Standard Cab)


9″ Big Lift Can-Am Defender XMR (Standard Cab)


The High Lifter 9″ Big Lift is even beefier! This all-inclusive kit features heavy-duty APEXX control arms in addition to giving you the added ground clearance you need to run large tires. Your machine will be one of the baddest on the trails!


Clear selection
SKU: N/A Category:

Take your machine to the next level with High Lifter’s APEXX 9″ Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most terrains. This kit also features the strongest front and rear control arms on the market. With 1.5” DOM steel tubing, these arms add power, durability, and support to your machine so it can withstand the abuse of a good ride.

The lower arms feature an adjustability component in the bushing collars to adjust camber that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.

Outlaw DHT XL Axle:

Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long-term life
Oversized CV joint housings to increase strength
Sliding bars on both ends for increased angle capability
Housings and bars made from 4340 Chromoly steel
Puncture-resistant boots which are durable in high and low temperature climates
Molybdenum disulfide, anti-oxidation, rustproof, and high-performance grease
This 9″ lift kit package includes the following components:

Heavy duty laser cut rear upper lift/shock relocation brackets
Eight custom heavy-duty APEXX Max Clearance Control Arms crafted from 1 1/2″x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
Adjustable heat-treated collars for camber adjustability with a 1” thread
Four Outlaw DHT XL axles
Custom tie rods with heim-style rod ends
Custom brake line kit
All required hardware
Detailed instructions with step-by-step photos
Tire Fitment:

Up to 38″ Outlaw 3

Up to 44” Magnum with High Lifter Portals
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Additional information

Weight 210 lbs
Dimensions 48 × 40 × 40 in

Black, Manta Green, Sunburst Yellow




High Lifter


2020 Can-Am Defender HD10 XMR
2021 Can-Am Defender HD10 XMR
2022 Can-Am Defender HD10 XMR